Fuel Specifications

RMG 380
Characteristic Unit Limit RMG 380
Viscosity @ 50°C mm2/s max 380
min 120
Density @ 15°C kg/m3 max 991
CCAI max 870
Sulfur % mass max Statutory requirements
Flash Point °C min 60
Hydrogen Sulfide mg/kg max 2
Acid Number mg KOH/g max 2.5
Carbon Residue,
Micro (MCR)
% mass max 18
Pour Point (upper) °C max 30
Water % vol. max 0.5
Ash % mass max 0.1
Vanadium mg/kg max 350
Sodium mg/kg max 100
Aluminium + Silicon mg/kg max 60
Unrefined Used
lubricating Oil (ULO)
mg/kg Ca > 30 and Zn > 15 or Ca > 30 and P > 15
Potential
Total Sediment (TSP)
% mass max 0.1
Accelerated
Total Sediment (TSA)
% mass Report
Existent Total Sediment
(TSE)
% mass Report
FAME Content % mass Report
Net Heat of Combustion
(LCV)
MJ/kg Report
DMA
Characteristic Unit Limit RMG 380
Viscosity @ 50°C mm2/s max 6
min 2
Density @ 15°C kg/m3 max 890
Cetane Index Min 40
Cetane Number Min
Sulfur % mass max
Flash Point °C min 60
Hydrogen Sulfide mg/kg max 2
Acid Number mg KOH/g max 0.5
Existent Total
Sediment (TSE)
% mass max
Oxidation Stability g/m3 max 25
h min
FAME Content % mass or vol. de Minimus
Net Heat of
Combustion (LCV)
MJ/kg
MCR on 10% dist.
Residue
% mass max 0.3
Carbon Residue,
Micro (MCR)
% mass max
Cloud Point °C max Report
Cold Filter Plugging
Point
°C Report
Pour Point °C max winter -6
max summer 0
Appearance Clear and Bright
Water % vol. max
Ash % mass max 0.01
Lubricity (WSD) @
60°C
µm Max 520
RMG 180
Characteristic Unit Limit RMG 180
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/Sa) Max. 180.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb (% m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/sa) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb % (m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
RMG 180
Characteristic Unit Limit RMG 180
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/Sa) Max. 180.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb (% m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/Sa) Min.
Max.
2.000
6.000
Flash Point (0C) Min. 60.0
Pour point (upperf) in summer (0C) Max. 0
Pour point (upperf) in winter (0C) Max. -6
Hydrogen Sulphide (mg/kg) Max. 2.00
Cloud Point f in Winter (0C) Max. report
Cloud Point f in Summer (0C) Max.
Sulphurb (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10% Volume distillation residue (% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.010
Total sediment by hot filitration (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Lubricity, corrected wear scar diameter (wsd 1,4) at 60O C h



Calcium and Zinc, or Calcium and Phosphorous
(µm)



( g/m3)

Max
520



25
Oxidation Stability (g/m3) Max. 25
Fatty Acid Methyl Ester
(FAMEe)
(% V/V) Max.
Cold filter plugging pointf In Winter (0C) Max. Report
Cold filter plugging pointf In Summer (0C) Max.
Appearance Clear and Brightg
RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/sa) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb % (m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
RMG 180
Characteristic Unit Limit RMG 180
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/Sa) Max. 180.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb (% m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/Sa) Min.
Max.
2.000
6.000
Flash Point (0C) Min. 60.0
Pour point (upperf) in summer (0C) Max. 0
Pour point (upperf) in winter (0C) Max. -6
Hydrogen Sulphide (mg/kg) Max. 2.00
Cloud Point f in Winter (0C) Max. report
Cloud Point f in Summer (0C) Max.
Sulphurb (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10% Volume distillation residue (% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.010
Total sediment by hot filitration (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Lubricity, corrected wear scar diameter (wsd 1,4) at 60O C h



Calcium and Zinc, or Calcium and Phosphorous
(µm)



( g/m3)

Max
520



25
Oxidation Stability (g/m3) Max. 25
Fatty Acid Methyl Ester
(FAMEe)
(% V/V) Max.
Cold filter plugging pointf In Winter (0C) Max. Report
Cold filter plugging pointf In Summer (0C) Max.
Appearance Clear and Brightg

RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500 Cb (mm2/s) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (Upperf ) in summer (0C) Max. 30
Pour point (Upperf ) in Winter (0C) Max. 30
Carbon residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurc (% m/m) statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
mg/kg The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphided (mg/kg) Max. 2.00
(Acid Numberc) (mg/kg) Max. 2.5

DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/s) Min
Max
2.000
6.000
Flash Point (0C) Min. 60.0
Pour point (upperd ) in summer (0C) Max. 0
Pour point (upperd ) in summer (0C) Max. -6
Hydrogen Sulphide (mg/kg) Max. 2.00
Cloud Point (OC) Max.
Sulphurb (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10%
Volume distillation residue
(% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.010
Total sediment by hot filtration (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Lubricity, corrected wear scar
diameter (wsd 1,4) at 60O Ch
µm Max. 520
Oxidation Stability (g/m3) Max. 25
Appearance Clear and Bright

RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
Kinematic viscosity at 500C (mm2/Sa) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (upperb ) in summer (0C) Max. 30
Pour point (upperb ) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18
Ash (% m/m) Max. 0.15
Water (% V/V) Max. 0.5
Sulphurc (% m/m) Max. statutory requirements
Vanadium (mg/kg) Max. 300
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 80
Used lubricating oil (ULO):
Zinc
Phosphorus
Calcium
(mg/kg) Max. The fuel shall be free from ULOd
Zinc – 15
Phosphorus – 15
Calcium – 15

DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/Sb) Min
Max
1.50
6.00
Flash Point (0C) Min. 60.0
Pour point (upperc ) in summer (0C) Max. 0
Pour point (upperc ) in Winter (0C) Max. -6
Cloud Point (OC) Max.
Sulphur (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10%
Volume distillation residue
(% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.01
Total sediment, Existent (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Appearancef (mgKOH/g) Max. Clear and bright
Vanadium (mg/kg) Max.
Aluminium plus Silicon (Mg/kg) Max.
Used lubricating oil (ULO):
Zinc
Phosphorus
Calcium
(Mg/kg) Max.


RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/sa) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb % (m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
RMG 180
Characteristic Unit Limit RMG 180
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/Sa) Max. 180.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb (% m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/Sa) Min.
Max.
2.000
6.000
Flash Point (0C) Min. 60.0
Pour point (upperf) in summer (0C) Max. 0
Pour point (upperf) in winter (0C) Max. -6
Hydrogen Sulphide (mg/kg) Max. 2.00
Cloud Point f in Winter (0C) Max. report
Cloud Point f in Summer (0C) Max.
Sulphurb (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10% Volume distillation residue (% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.010
Total sediment by hot filitration (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Lubricity, corrected wear scar diameter (wsd 1,4) at 60O C h



Calcium and Zinc, or Calcium and Phosphorous
(µm)



( g/m3)

Max
520



25
Oxidation Stability (g/m3) Max. 25
Fatty Acid Methyl Ester
(FAMEe)
(% V/V) Max.
Cold filter plugging pointf In Winter (0C) Max. Report
Cold filter plugging pointf In Summer (0C) Max.
Appearance Clear and Brightg
RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/sa) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb % (m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
RMG 180
Characteristic Unit Limit RMG 180
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500C (mm2/Sa) Max. 180.0
Flash Point (0C) Min. 60.0
Pour point (upperd) in summer (0C) Max. 30
Pour point (upperd) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurb (% m/m) Max. statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
(mg/kg) The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphide (mg/kg) Max. 2.00
(Acid Numberc) (mgKOH/g) Max. 2.5
DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/Sa) Min.
Max.
2.000
6.000
Flash Point (0C) Min. 60.0
Pour point (upperf) in summer (0C) Max. 0
Pour point (upperf) in winter (0C) Max. -6
Hydrogen Sulphide (mg/kg) Max. 2.00
Cloud Point f in Winter (0C) Max. report
Cloud Point f in Summer (0C) Max.
Sulphurb (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10% Volume distillation residue (% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.010
Total sediment by hot filitration (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Lubricity, corrected wear scar diameter (wsd 1,4) at 60O C h



Calcium and Zinc, or Calcium and Phosphorous
(µm)



( g/m3)

Max
520



25
Oxidation Stability (g/m3) Max. 25
Fatty Acid Methyl Ester
(FAMEe)
(% V/V) Max.
Cold filter plugging pointf In Winter (0C) Max. Report
Cold filter plugging pointf In Summer (0C) Max.
Appearance Clear and Brightg

RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
CCAI Max. 870
Kinematic viscosity at 500 Cb (mm2/s) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (Upperf ) in summer (0C) Max. 30
Pour point (Upperf ) in Winter (0C) Max. 30
Carbon residue: Micro method (% m/m) Max. 18.00
Ash (% m/m) Max. 0.100
Water (% V/V) Max. 0.50
Sulphurc (% m/m) statutory requirements
Sodium (mg/kg) Max. 100
Vanadium (mg/kg) Max. 350
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 60
Used lubricating oil (ULO)



Calcium and Zinc, or Calcium and Phosphorous
mg/kg The fuel Shall be free from ULO.
A fuel shall be considered to
contain ULO when either one of
the following conditions is met:
Calcium> 30 and Zinc > 15; or
Calcium> 30 and Phosphorus >15
Hydrogen Sulphided (mg/kg) Max. 2.00
(Acid Numberc) (mg/kg) Max. 2.5

DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/s) Min
Max
2.000
6.000
Flash Point (0C) Min. 60.0
Pour point (upperd ) in summer (0C) Max. 0
Pour point (upperd ) in summer (0C) Max. -6
Hydrogen Sulphide (mg/kg) Max. 2.00
Cloud Point (OC) Max.
Sulphurb (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10%
Volume distillation residue
(% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.010
Total sediment by hot filtration (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Lubricity, corrected wear scar
diameter (wsd 1,4) at 60O Ch
µm Max. 520
Oxidation Stability (g/m3) Max. 25
Appearance Clear and Bright

RMG 380
Characteristic Unit Limit RMG 380
Density at 150C (kg/m3) Max. 991.0
Kinematic viscosity at 500C (mm2/Sa) Max. 380.0
Flash Point (0C) Min. 60.0
Pour point (upperb ) in summer (0C) Max. 30
Pour point (upperb ) in Winter (0C) Max. 30
Carbon Residue: Micro method (% m/m) Max. 18
Ash (% m/m) Max. 0.15
Water (% V/V) Max. 0.5
Sulphurc (% m/m) Max. statutory requirements
Vanadium (mg/kg) Max. 300
Total sediment aged (% m/m) Max. 0.10
Aluminium plus Silicon (mg/kg) Max. 80
Used lubricating oil (ULO):
Zinc
Phosphorus
Calcium
(mg/kg) Max. The fuel shall be free from ULOd
Zinc – 15
Phosphorus – 15
Calcium – 15

DMA
Characteristic Unit Limit DMA
Density at 150C (kg/m3) Max. 890.0
Kinematic Viscosity at 400C (mm2/Sb) Min
Max
1.50
6.00
Flash Point (0C) Min. 60.0
Pour point (upperc ) in summer (0C) Max. 0
Pour point (upperc ) in Winter (0C) Max. -6
Cloud Point (OC) Max.
Sulphur (% m/m) Max. Statutory Requirements
Cetane Index Min. 40
Carbon residue on 10%
Volume distillation residue
(% m/m) Max. 0.30
Carbon residue: Micro Method (% m/m) Max.
Ash (% m/m) Max. 0.01
Total sediment, Existent (% m/m) Max.
Water (% V/V) Max.
Acid Number (mgKOH/g) Max. 0.5
Appearancef (mgKOH/g) Max. Clear and bright
Vanadium (mg/kg) Max.
Aluminium plus Silicon (Mg/kg) Max.
Used lubricating oil (ULO):
Zinc
Phosphorus
Calcium
(Mg/kg) Max.


Disclaimer: The above is a service for informational purposes only. Spectra Fuels assumes no responsibility for any errors or omissions.